• Wintec Port Devices Driver Updater
• Wintec Port Devices Drivers
• Wintec Port Devices Driver Device

Printer – WIN90PT

Drivers checkpoint. We are able to provide presale and post-sale support and services, removing any potential headaches that can occur during any hard wear acquisition process. Device and Driver Installation.; 2 minutes to read; t; In this article. This section explains how devices and drivers are installed in Windows. If you are unfamiliar with the device and driver installation process, we recommend that you start by reviewing Roadmap for Device and Driver Installation. I'm willing to bet the serial port driver is the 'SOL' driver for the Intel AMT remote access feature. Yep, i was right this system supports 'AMT' but only up to win 7 and possibly 8. Intel AMT LMSSOL for AMT 5.xx is the serial/program package you would install under win 7 and this package is not compatable under win 10.

Printers with fashion design and fast printing speed, suit high-end POS systems. We have both thermal and dot matrix printer.

Features:

• High speed printing
• Durable high quality cutter and engine
• Support USB/Serial/Parallel/LAN/WiFi port
• Beeper for kitchen use

Specifications:

• Printer Method: Direct line thermal
• Character: IBM character set II
• Printer Speed: 220mm/s
• Interface: Serial/ Parallel/USB
• Auto cutter:yes, 1.5 milllion times
• Paper Dimension (W*OD)(mm): 79.5*80
• Power Supply: DC24V/2A
• MCBF: 150km
• Dimension(mm): 145(W)*152(H)*220(D)

Wintec Port Devices Driver Updater

Hardware - Install a Printer as a Local Port Device

Applies to: Windows 10, 8.1, 8, 7, Vista and XP

How do I install a printer as a Local Port device?
Solution:
Use the instructions below to install the printer using a Local Port on the given operating system.
NOTE: These instructions assume the following:

• The printer is already shared from the computer that is hosting it. See How to Share a Printer- FAQ 38545 for more information.
• That you have downloaded the proper drivers for the printer model you are installing.
• That you are able to access the shared resources on that computer without being prompted for login credentials. If you cannot access the hosting PC without providing credentials, correct that issue before proceeding.
• You have ensured the printer is shared and security is set to Everyone with Full Control.

If these steps have not been performed, please do so before attempting installation of a Local Port device. Failure to do so will result in failure

Wintec Port Devices Drivers

errors when trying to create the port.
Click the + or the header to expand the section.

To install a printer locally on Windows 10, follow these steps:

1. Right-click on the Windows logo in the bottom left of the screen. Select Search.
   
2. Search for Control Panel. Select it from the search results.
   
3. Find Devices and Printers in the Control Panel and open it.
   
4. Click Add a Printer (on the top).
   
5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
   
   
6. Click Add a local printer or network printer with manual settings. Click Next.
   
   
7. Click Create a new port. Select Local Port for Type of port.
   
8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
   
9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
   
10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8.1, follow these steps:

Wintec Port Devices Driver Device

1. Right-click on the Windows logo in the bottom left of the screen. Select Control Panel.
2. Find Devices and Printers in the Control Panel and open it.
3. Click Add a Printer (on the top).
4. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
5. Click Add a local printer or network printer with manual settings. Click Next.
6. Click Create a new port. Select Local Port for Type of port.
7. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
8. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
9. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8, follow these steps:

1. Move your mouse to the lower-right to bring up the Charms bar, or press Windows key + C.
2. Click on the Settings gear, then click Control Panel.
3. In Control Panel, open Devices and Printers.
4. Click Add a Printer (on the top).
5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
6. Click Add a local printer or network printer with manual settings. Click Next.
7. Click Create a new port. Select Local Port for Type of port.
8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows Vista and 7, follow these steps:

1. Click Start | Devices and Printers.
2. Click Add a Printer (on the top).
3. Select Add a local printer.
4. Select Create a new port. Select Local Port for the Port Type. Click Next.
5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK
6. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
7. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on a Windows XP-based computer, follow these steps:

1. Go to Start |Control Panel |Printers and Other Hardware |Printers and Faxes.
2. Double-click Add Printer to start the Add Printer Wizard. Click Next.
3. Click Local printer. Clear the Automatically detect and install check box. Click Next.
4. Click Create a new port. Click Local Port in the Port type section.
5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer: serverprinter.
6. Click Next. Select the driver for your printer. If the driver is not listed, click Have Disk and browse to the location where you earlier extracted the drivers.
7. Click Next, and then follow the instructions to finish the wizard. When prompted to share the printer, select Do not share this printer.
   NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Printed copies of this document are considered uncontrolled.
21672.Rev006 01.06.2021