Drivers USB Serial Port



  1. Windows Drivers Usb Serial Port
  2. Driver Usb Serial Port Octopus Box
  3. Driver Usb Serial Port Windows Xp

Symptoms

ASIX High-Speed USB Serial Port Driver 3.18.1.0 for Windows 10 Creators Update 64-bit 584 downloads. Other Drivers & Tools ASIX. Windows 10 64 bit. Jun 8th 2017, 19. All this devices use a PL2303 to provide a connection to an USB port, but inside, they are RS232-like interface build (and appear as a COM port in your operating system). When you plug the device into USB, it is well recognized by W10 and it try to load the Prolific driver. Download Windows USB 2.0 Drivers Updates. Usually USB 2.0 means a faster connection speed and this is the major difference (generally but not always) between USB1, USB2 and USB3, with the latter providing super speeds of up to 5Gbps. Like all drivers, USB drivers are updated regularly and should be kept up-to-date with major changes or updates. It defines Windows Runtime classes that can use to communicate with a USB CDC device through a serial port or some abstraction of a serial port. The classes provide functionality to discover such serial device, read and write data, and control serial-specific properties for flow control, such as setting baud rate, signal states.

If you quickly and repeatedly insert and remove a USB device, the USB port may stop responding. When the port is in this state, it no longer recognizes any USB device, and the USB device will not work.
This article helps you fix the problem.

Windows Drivers Usb Serial Port

Prerequisites

You must use administrative credentials to log on to Windows to perform some of the troubleshooting methods that are listed in this article. If this is your personal computer, you are likely already logged on with an administrator account. If this is a computer that is part of a network at work, you might have to ask the system administrator for help.

Resolution

To fix this problem, use the following methods in the order in which they are listed. After each method, check the USB device to see whether the problem is fixed. If the problem is not fixed, try the next method.
This article also includes a workaround that you can try if these methods do not work.

Method 1: Use Device Manager to scan for hardware changes

Ooo Infomash Driver Download for Windows 10. Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.
To scan for hardware changes, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box. 3com 3crshew696 wireless lan usb adapter driver download windows 7.

  2. Type devmgmt.msc, and then click OK. Device Manager opens.

  3. In Device Manager, click your computer so that it is highlighted.

  4. Click Action, and then click Scan for hardware changes.

  5. Check the USB device to see whether it is working.

Usb serial port drivers

If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2.

Method 2: Restart the computer

If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working.
If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3.

Method 3: Disable and re-enable the USB controller

Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the 'Workaround' section.
To disable and re-enable the USB controllers, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.

  2. Type devmgmt.msc, and then click OK. Device Manager opens.

  3. Expand Universal Serial Bus controllers.
    Note You might have to scroll down the list to find this item.

  4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.

  5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.

  6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

  7. Check the USB device to see whether it is working.

Drivers USB Serial Port

If the USB port recognizes the device and if you can use the device, you are finished.
If this method fixed the problem, you are finished. If this method did not fix the problem, go to the 'Workaround' section.

Workaround

If none of these methods worked for you, you can disable the Selective Suspend feature. However, be aware that when the Selective Suspend feature is disabled, all USB host controller drivers (and therefore all USB ports and connected USB devices) in the system are affected. Therefore, your computer cannot suspend any USB devices that are connected to it, and the USB devices can continue to use power while connected to the computer. Additionally, the Allow the computer to turn off this device to save power check box does not appear on the Power Management tab for the USB Root Hub.
This section is intended for an advanced computer user.
You can disable the USB Selective Suspend feature as a workaround by editing the registry. The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device. Therefore, the USB device is unresponsive when you try to use it.
You might want to disable this feature for server products where power management is not important or required.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in WindowsTo disable the Selective Suspend feature, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.

  2. Type regedit, and then click OK. Registry Editor opens.

  3. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesUSB

  4. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps:

    1. On the Edit menu, point to New, and then click DWORD.

    2. Type DisableSelectiveSuspend, and then press ENTER.

    3. On the Edit menu, click Modify.

  5. In the Value data field, type 1 to disable the Selective Suspend feature, and then click OK.

Now go to the 'Did this fix the problem?' section.

Cause

This problem may occur because of a timing issue that prevents the computer from detecting the USB device.
Microsoft and the hardware vendors that manufacture the chips that are used for USB have investigated the problem. However, the results were inconclusive because of the intermittent nature of the problem.

Status

Microsoft is researching this problem and will post more information in this article when the information becomes available.

Symptoms

Serial

If you quickly and repeatedly insert and remove a USB device, the USB port may stop responding. When the port is in this state, it no longer recognizes any USB device, and the USB device will not work.
This article helps you fix the problem.

Prerequisites

You must use administrative credentials to log on to Windows to perform some of the troubleshooting methods that are listed in this article. If this is your personal computer, you are likely already logged on with an administrator account. If this is a computer that is part of a network at work, you might have to ask the system administrator for help.

Driver Usb Serial Port Octopus Box

Resolution

To fix this problem, use the following methods in the order in which they are listed. After each method, check the USB device to see whether the problem is fixed. If the problem is not fixed, try the next method.
This article also includes a workaround that you can try if these methods do not work.

Method 1: Use Device Manager to scan for hardware changes

Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.
To scan for hardware changes, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.

  2. Type devmgmt.msc, and then click OK. Device Manager opens.

  3. In Device Manager, click your computer so that it is highlighted.

  4. Click Action, and then click Scan for hardware changes.

  5. Check the USB device to see whether it is working.

If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2.

Method 2: Restart the computer

If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working.
If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3.

Method 3: Disable and re-enable the USB controller

Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the 'Workaround' section.
To disable and re-enable the USB controllers, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.

  2. Type devmgmt.msc, and then click OK. Device Manager opens.

  3. Expand Universal Serial Bus controllers.
    Note You might have to scroll down the list to find this item.

  4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.

  5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.

  6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

  7. Check the USB device to see whether it is working.

If the USB port recognizes the device and if you can use the device, you are finished.
If this method fixed the problem, you are finished. If this method did not fix the problem, go to the 'Workaround' section.

Driver Usb Serial Port Windows Xp

Workaround

If none of these methods worked for you, you can disable the Selective Suspend feature. However, be aware that when the Selective Suspend feature is disabled, all USB host controller drivers (and therefore all USB ports and connected USB devices) in the system are affected. Therefore, your computer cannot suspend any USB devices that are connected to it, and the USB devices can continue to use power while connected to the computer. Additionally, the Allow the computer to turn off this device to save power check box does not appear on the Power Management tab for the USB Root Hub.
This section is intended for an advanced computer user.
You can disable the USB Selective Suspend feature as a workaround by editing the registry. The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device. Therefore, the USB device is unresponsive when you try to use it.
You might want to disable this feature for server products where power management is not important or required.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in WindowsTo disable the Selective Suspend feature, follow these steps:

  1. Click Start, and then click Run.
    Note If you are running Windows Vista, click Start, and then use the Start Search box.

  2. Type regedit, and then click OK. Registry Editor opens.

  3. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINESystemCurrentControlSetServicesUSB

  4. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps:

    1. On the Edit menu, point to New, and then click DWORD.

    2. Type DisableSelectiveSuspend, and then press ENTER.

    3. On the Edit menu, click Modify.

  5. In the Value data field, type 1 to disable the Selective Suspend feature, and then click OK.

Now go to the 'Did this fix the problem?' section.

Cause

This problem may occur because of a timing issue that prevents the computer from detecting the USB device.
Microsoft and the hardware vendors that manufacture the chips that are used for USB have investigated the problem. However, the results were inconclusive because of the intermittent nature of the problem.

Status

Microsoft is researching this problem and will post more information in this article when the information becomes available.